CAT950H: A loader with low maintenance costs and strong power

Parameter configuration

  1. Power system
    Engine model: Cat® C7 ACERT™ turbocharged diesel engine
    Rated power:
    Net power: 172 kW (230 HP) @ 2,000 rpm
    Peak torque: 1,020 N·m @ 1,400 rpm
    Emission standard: Meets Tier 3/Stage IIIA standard (non-road emission regulations).
  2. Performance parameters
    Operating weight:
    Basic configuration: Approximately 16,500–18,000 kg (depending on bucket and attachment).
    Bucket capacity:
    Standard bucket: 2.7–4.5 m³ (optional rock bucket, general bucket, coal bucket, etc.).
    Maximum traction: Approximately 160 kN (four-wheel drive mode).
    Maximum breakout force: 125 kN (bucket tip).
    Travel speed:
    Forward: Up to 38 km/h
    Reverse: Up to 25 km/h
  3. Hydraulic system
    Main pump flow: Dual gear pump design, total flow approximately 320 L/min.
    Working hydraulic pressure: 24.5 MPa (standard system pressure).
    Lifting time (full bucket): Approximately 6.5 seconds (bucket raised from ground to maximum height).
    Dumping height: Approximately 3.1–3.4 m (depending on bucket configuration).
  4. Transmission system
    Transmission: Cat 4-speed automatic power shift transmission (with electronic control).
    Drive mode: Full-time four-wheel drive (4WD).
    Differential lock: Automatic/manual differential lock.
  5. Dimensions and structure
    Total length: Approximately 8.5 m (including bucket).
    Total width: Approximately 2.8 m.
    Tire specifications: Standard configuration is 23.5R25 or 26.5R25 (optional puncture-resistant tires).
    Articulated steering angle: 35° on each side, small turning radius and high flexibility.

Core Features

  1. Efficient operation capability
    Intelligent power management: Automatically adjust engine and hydraulic system output according to load, balancing fuel efficiency and performance.
    Fast cycle time: Optimized hydraulic system shortens bucket lifting, unloading and return time.
    High traction: Four-wheel drive + differential lock design, adapting to complex terrain such as mud and slopes.
  2. Operation comfort
    Cab design:
    ROPS/FOPS certified sealed cab, dust and noise reduction.
    Suspension seat, multi-function control handle, automatic air conditioning.
    Panoramic glass vision, reducing blind spots.
    Human-machine interaction:
    LCD display monitors fuel, hydraulic temperature, fault codes, etc. in real time.
    Optional Cat intelligent technology (such as grade control system, weighing system).
  3. Durability and convenient maintenance
    Strong structure:
    Heavy-duty frame and boom design, long fatigue life.
    Wear-resistant steel plates reinforce buckets and key connection points.
    Maintenance optimization:
    Centralized lubrication points to reduce daily maintenance time.
    The engine compartment is designed with side opening for easy maintenance.
    Long maintenance cycle (such as oil change interval of 500 hours).
  4. Fuel economy
    ACERT engine technology: optimizes combustion efficiency and reduces fuel consumption.
    ECO mode: automatically reduces engine speed under light load to save fuel.

Main advantages

  1. Adapt to a wide range of working conditions
    Multi-scenario application:
    Mines and quarries: equipped with rock buckets and high-strength structural parts.
    Construction sites: General buckets for quick loading and unloading of sand, gravel, and concrete waste.
    Agriculture/ports: optional coal buckets or side dump buckets.
  2. Cost-effectiveness
    Low fuel consumption: about 8-12% fuel saving compared to similar models.
    Long life cycle: key components are designed to last more than 20,000 hours.
    High resale value: Cat equipment has a high value retention rate in the second-hand market.
  3. Intelligent support
    Cat Intelligence System (optional): remotely monitor equipment status, positioning and operation data to optimize fleet management.
    Fault diagnosis: quickly read fault codes through the display to reduce downtime.

We are a professional supplier of second-hand construction machinery. If you are interested in the machines, we welcome you to communicate with us.

Leave a Comment

Your email address will not be published.

By Brands
Bobcat (1)
CAT (118)
Doosan (1)
HOWO (2)
JCB (1)
Kubota (2)
Other (0)
Sany (7)
Toyota (1)
Volvo (2)
XCMG (2)